高速耕作条件下土壤离散元参数标定

Abstract

For the problem of lacking reliable values of soil parameters required for dynamic simulation analysis of soil under high-speed tillage, no-tillage soil was taken as the research object and its parameters were calibrated using the discrete element method in this study. The Edinburgh Elasto-Plastic Adhesion (EEPA) model was determined as the soil contact model by obtaining the loading force-deformation relationship through uniaxial sealing compression tests. The regression equation was established using Plackett-Burman test and quadratic orthogonal rotation test, and the interaction effects were analyzed. The measured values of the pile angle and strain were obtained through the pile angle test and the uniaxial seal compression test, and the optimal solution was carried out. Further, the simulated values and the measured values under the optimal parameters were compared and verified, the result showed that the error values were all less than 1%. Finally, the soil model was used for high-speed tillage simulation analysis, and the obtained soil particle displacement and groove width were compared with the measured values. It was found that the ditch width error value was 3.04% and the soil displacement was basically the same. This study proved that the contact model parameters were relatively reliable, which could provide theoretical reference for the dynamic characteristics of soil during high-speed cultivation of no-tillage soil.