Abstract
We report a watt-level passively Q -switched 2.8 μm mid-infrared multi-mode fiber laser by employing multi-layered two-dimensional MXene- Ti 3 C 2 T x as the saturable absorber (SA). The MXene- Ti 3 C 2 T x is fabricated by selectively etching aluminum layers in Ti 3 AlC 2 . The non-saturable loss, modulation depth, and saturable intensity of the SA at 2866 nm were measured to be 25.0%, 33.2%, and 0.043 GW / cm 2 , respectively. The maximum average output power of the Ti 3 C 2 T x Q -switched fiber laser reached 1.09 W at 28.23% slope efficiency. The pulse repetition rate, shortest pulse width, pulse peak power, and single-pulse energy were 78.12 kHz, 1.04 μs, 13.4 W, and 13.93 μJ, respectively. This is the first demonstration of watt-level pulse generation in a mid-infrared fiber laser using low dimensional materials, to the best of our knowledge. These results indicate that the Ti 3 C 2 T x is a reliable and superior broadband SA for high power mid-infrared pulsed laser generation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
