Multi-state failure phenomenon and analysis using semi-Markov model

Abstract

PurposeDegraded failures and sudden critical failures are quite prevalent in industries. Degradation processes commonly belong to Weibull family and critical failures are found to follow exponential distribution. Therefore, it becomes important to carry out reliability and availability analysis of such systems. From the reported literature, it is learnt that models are available for the situations where the degraded failures as well as critical failures follow exponential distribution. The purpose of this paper is to present models suitable for reliability and availability analysis of systems where the degradation process follows Weibull distribution and critical failures follow exponential distribution.Design/methodology/approachThe research uses Semi-Markov modeling using the approach of method of stages which is suitable when the failure processes follow Weibull distribution. The paper considers various states of the system and uses state transition diagram to present the transition of the system among good state, degraded state and failed state. Method of stages is used to convert the semi-Markov model to Markov model. The number of stages calculated in Method of stages is usually not an integer value which needs to be round off. Method of stages thus suffers from the rounding off error. A unique approach is proposed to arrive at failure rates to reduce the error in method of stages. Periodic inspection and repairs of systems are commonly followed in industries to take care of system degradation. This paper presents models to carry out reliability and availability analysis of the systems including the case where degraded failures can be arrested by appropriate inspection and repair.FindingsThe proposed method for estimating the degraded failure rate can be used to reduce the error in method of stages. The models and the methodology are suitable for reliability and availability analysis of systems involving degradation which is very common in systems involving moving parts. These models are very suitable in accurately estimating the system reliability and availability which is very important in industry. The models conveniently cover the cases of degraded systems for which the model proposed by Hokstad and Frovig is not suitable.Research limitations/implicationsThe models developed consider the systems where the repair phenomenon follows exponential and the failure mechanism follows Weibull with shape parameter greater than 1.Practical implicationsThese models can be suitably used to deal with reliability and availability analysis of systems where the degradation process is non-exponential. Thus, the models can be practically used to meet the industrial requirement of accurately estimating the reliability and availability of degradable systems.Originality/valueA unique approach is presented in this paper for estimating degraded failure rate in the method of stages which reduces the rounding error. The models presented for reliability and availability analyses can deal with degradable systems where the degradation process follows Weibull distribution, which is not possible with the model presented by Hokstad and Frovig.