Abstract
Two types of wastewaters from the dye manufacturing process were treated by multistage chemical coagulation combined with ozonation. By using the coagulant iron(II) chloride and a commercial coagulant aid, the majority of COD was removed in advance of ozonation, a similar repeated treatment cycle was performed after settlement of the coagulant in each cycle. Results showed that the optimum concentrations to be used were 2·5% (v/v) iron(II) chloride and 35 mg dm−3 coagulant aid. The decolorization efficiency was >99% and the COD elimination was >90%. The multistage combined chemical coagulation ozonation treatment was found to be superior to the single-stage treatment. © 1998 SCI.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Chemical Technology & Biotechnology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
