Abstract
Formation of nanoscale helium (He) bubbles in reduced activation ferritic/martensitic steels may lead to degradation of mechanical properties of materials. Transmission electron microscopy (TEM) has commonly been used to image the Fresnel contrast of He bubbles, using an underfocus of 0.5-1µm. This paper presents our study of multislice simulation of the size correlation between imaged Fresnel rings and the actual He bubbles. It was found that for bubbles equal to or >3nm in diameter, the imaged bubble size, represented by its inner diameter of the first dark Fresnel ring (D(in)) in underfocused imaging conditions, increases with increasing electron-beam incoherency, but decreases with increasing underfocus. The electron-beam accelerating voltage, bubble size, bubble position and TEM sample thickness were found to have no significant influence on the deviation of D(in) from the actual bubble size (D(0)). However, for bubbles equal to or <2nm, D(in)/D(0) increases dramatically with increasing underfocus when it is above a threshold limit (e.g. Δf=-1µm for a 2-nm bubble). The results of this study also suggested that He bubbles can be differentiated from argon (Ar) bubbles by contrast differences.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
