Multisite surface reaction versus transport control during the hydrolysis of a complex oxide

Abstract

Dissolution experiments of a tholeiite basalt glass carried out at different pH and T (up to 300°C) using a rotatingdisc apparatus show that, depending on pH and T, dissolution can be controlled by one of the following steps: (1) surface reaction; (2) transport of reactants in solution; and (3) mixed reaction. The activation energies of these different processes were found to be 60, 9 and 15–50 kJ mol −1, respectively. Taking account of these results, it appears likely that surface reactions are not rate limiting for the hydrolysis of most crystalline silicate minerals in hydrothermal and metamorphic processes, and that caution should be exercised when predicting rate of reactions at high temperatures solely on the basis of activation energies measured at low temperatures. Comparison of experimental and theoretical potentiometric titrations of the basalt glass and its constituent oxides indicates that the adsorption of H + and OH − ions at the basalt surface is metal cation specific and that the net adsorption can be predicted from the sole knowledge of the acidity constants of the network-forming constituent oxides. We found that in the acidic pH region dissolution is promoted by the adsorption of H + on al and Fe surface sites while in the basic region, dissolution is promoted by the adsorption of OH − on Si sites. The combination of the two distinct types of surface sites, Al and Fe on the one hand, and Si on the other hand, results in a dissolution rate minimum at a pH-value between the pH zpc of the two groups of oxide components. Linear regressions with a slope n=3.8 are observed both in acid and alkaline solutions in logarithmic plots of the rate of dissolution vs. the surface charge. The value of n, which represents the number of protonation or hydroxylation steps prior to metal detachment, has been found equal to the mean valence of the network-forming metals. Combining concepts of surface coordination chemistry with transition state theory afforded characterisation of the activated complexes involved in basalt dissolution processes. From the values obtained for the thermodynamic properties of activation for basalt dissolution it is assumed that the activated complexes formed during the H 2O-promoted dissolution of the basalt glass are more tightly bonded than those formed during H +- or OH −-promoted dissolution.