Abstract
Two SiC corrugated structured packings are developed: one being smooth plate and the other made of porous SiC foam. Accordingly, a macroscale three-dimensional (3D) geometric module of two corrugated sheets is introduced with a periodic boundary and a microscale computational geometry is gained from arrayed tetrakaidecahedrons. Single-phase modeling is carried out in the macro module to determine the dry pressure drops for the two types of packing. The results show that the porous SiC packing has a higher pressure drop than that of the smooth one. Two-phase flow for smooth packing is simulated with a VOF-like model provided by CFX in the macroscale geometry. It is found that openings in corrugated plates can improve the film distribution and mass-transfer efficiency. Microsimulation of two-phase flow in the porous SiC packing is performed, and the results prove that liquid can go inside the SiC foam and extend along the foam matrix with a velocity. Therefore, the porous foam can provide a larger effective gas-liquid interfacial area for mass transfer, which explains its larger theoretical plate number, compared to the smooth packing. Performance parameters including pressure drop and liquid holdup have been measured to validate the simulation method, while the distillation experiments have been carried out to study the mass-transfer efficiency of the novel SiC packings.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
