Abstract
AbstractThe objective of the present work is to understand how the main constituents of sizing modify the interfacial strength, the mechanical properties of epoxy composites as well as their durability. In this study, two model interphases between E‐glass fibers and epoxy resin were designed and studied in terms of adhesion and mechanical strength from nano to macroscale. The first one is made from a reactive sizing of APTMS silane coupling agent and DGEBA pre‐polymer film‐former. The other one contains a non‐reactive MTES silane and neutralized DGEBA film‐former. The sizings were evidenced by SEM/AFM observations and XPS spectroscopy. The characterization of the prepared composites by AFM nano‐mechanic mode, micromechanical tests revealed the effect of the sizing chemistry on the interfacial properties between glass fibers and matrix. The interfacial strength is more important for the composites reinforced with APTMS‐DGEBA sized fibers than those prepared with MTES‐BGEA sized fibers. In each case, an interphase area of around 200 nm width is detected at fibers vicinity. In this area, the elastic modulus is more than 25% lower than the bulk matrix modulus.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
