Abstract
CO2 capture and storage is an important technology for mitigating climate change. Design of efficient strategies for safe, long-term storage requires the capability to efficiently simulate processes taking place on very different temporal and spatial scales. The physical laws describing CO2 storage are the same as for hydrocarbon recovery, but the characteristic spatial and temporal scales are quite different. Petroleum reservoirs seldom extend more than tens of kilometers and have operational horizons spanning decades. Injected CO2 needs to be safely contained for hundreds or thousands of years, during which it can migrate hundreds or thousands of kilometers. Because of the vast scales involved, conventional 3D reservoir simulation quickly becomes computationally unfeasible. Large density difference between injected CO2 and resident brine means that vertical segregation will take place relatively quickly, and depth-integrated models assuming vertical equilibrium (VE) often represent a better strategy to simulate long-term migration of CO2 in large-scale aquifer systems. VE models have primarily been formulated for relatively simple rock formations and have not been coupled to 3D simulation in a uniform way. In particular, known VE simulations have not been applied to models of realistic geology in which many flow compartments may exist in-between impermeable layers. In this paper, we generalize the concept of VE models, formulated in terms of well-proven reservoir simulation technology, to complex aquifer systems with multiple layers and regions. We also introduce novel formulations for multi-layered VE models by use of both direct spill and diffuse leakage between individual layers. This new layered 3D model is then coupled to a state-of-the-art, 3D black-oil type model. The formulation of the full model is simple and exploits the fact that both models can be written in terms of generalized multiphase flow equations with particular choices of the relative permeabilities and capillary pressure functions. The resulting simulation framework is very versatile and can be used to simulate CO2 storage for any combination of 3D and VE-descriptions, thereby enabling the governing equations to be tailored to the local structure. We demonstrate the simplicity of the model formulation by extending the standard flow-solvers from the open-source Matlab Reservoir Simulation Toolbox (MRST), allowing immediate access to upscaling tools, complex well modeling, and visualization features. We demonstrate this capability on both conceptual and industry-grade models from a proposed storage formation in the North Sea. The current implementation assumes a sharp interface for the VE model, where the capillary forces do not lead to a capillary fringe. While the examples are taken specifically from CO2 storage applications, the framework itself is general and can be applied to many problems in which parts of the domain are dominated by gravity segregation. Such applications include gas storage and hydrocarbon recovery from gas reservoirs with local layering structure.
Submitted Version (Free)
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.