Abstract

We evaluated the feasibility of extracting selectively and rapidly herbicide residues in soils by hot water and collecting analytes with a Carbograph 4 solid-phase extraction (SPE) cartridge set on-line with the extraction cell. Phenoxy acid herbicides and those nonacidic and acidic herbicides which are often used in combination with phenoxy acids were selected for this study. Five different soil samples were fortified with target compounds at levels of 100 and 10 ng/g (30 ng/g of clopyralid and picloram) by following a procedure able to mimic weathered soils. Herbicides were extracted with water at 90 °C and collected on-line by the SPE cartridge. After the cartridge was disconnected from the extraction apparatus, analytes were recovered by stepwise elution to separate nonacidic herbicides from acidic ones. The two final extracts were analyzed by liquid chromatography/mass spectrometry with an electrospray ion source. At the lowest spike level considered, analyte recoveries ranged between 81 and 93%, except those for 2,4-DB and MCPB, which were 63%. For 16 herbicides out of 18, the ANOVA test showed recoveries were not dependent on the type of soil. The method detection limit was in the 1.7-10 ng/g range. For the analytes considered, method comparison showed this extraction method was overall more efficient than Soxhlet and sonication extraction techniques.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call