Multiple‐point electrochemical detection for a dual‐channel hybrid PDMS‐glass microchip electrophoresis device

Abstract

A new PDMS-based dual-channel MCE with multiple-point amperometric detection has been evaluated. Electrophoresis has been optimised in a single-channel device. Pretreatment with 0.1 M NaOH is very important for increasing and stabilising the EOF. The precision is adequate for a day's work in terms of both peak current and migration time. The RSD of the peak current for five successive signals was 1.9, 2.4 and 3.1% for dopamine, p-aminophenol and hydroquinone. RSD for the migration time was always less than 1.3%, which demonstrates the stability of the EOF and the possibility of running multiple experiments in the same microchip. The adequate inter-microchip precision as well as the rapid and simple manufacturing procedure indicates the disposable nature of the PDMS microchips. A dual-channel device with very simple multiple-point amperometric detection is proposed here. Elasticity of the PDMS allows removing the polymer slightly and aligning gold wires working electrodes. Injection can be performed from each of the sample reservoirs or from both simultaneously. The distance between the separation channels is critical for obtaining adequate signals as well as the introduction of a high-voltage electrode in the buffer reservoir. Simultaneous measurement of the same analytes in both channels is possible by applying the same potential. Moreover, since no cross-separation is produced, different analytes or samples can be simultaneously measured.