Abstract
Interference effects between two coherent laser beams have long been used to create simple grating patterns in photoresist. With the addition of multiple exposures with variations in period, phase, and orientation, in the same level of photoresist, highly complex one- and two-dimensional patterns of potential interest for device application are demonstrated. The spatial scale of the lines forming these patterns is ∼1/4 of the writing wavelength λ (period to λ/2 and line to space ratio of 1:1) and is in the extreme submicron range, ∼0.1 μm, for readily available laser sources, such as an Ar+-ion laser operating at 364 nm. Importantly, the depth-of-focus for these pairwise exposures is unlimited on the scale of typical semiconductor device topographies and large area, uniform exposures to scales much larger than projected integrated circuit die sizes (e.g., to 30×30 cm2) are easily achieved. These patterns are closely related to moiré interference patterns; relationships are illustrated. Diffractive readout is shown to be a powerful and intuitive technique for monitoring these structures. Additional flexibility in pattern fabrication is provided with conventional lithography to define areas on a larger scale and by the use of aperture and phase masks to isolate areas. An example is the fabrication of an interdigitated structure with submicron spaces over a large area.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have