Abstract

Abstract The ThO2 fuel has higher thermal conductivity and melting boiling point than the UO2 fuel, which is beneficial to the fast removal of heat and the improvement of fuel melt margin. In this paper, the material properties and thermodynamic behaviors of thorium-based fuel were firstly reviewed. And then the thermal physical properties and the fuel behavior models of Th0.923U0.077O2 fuel and Th0.923Pu0.077O2 fuel have been implemented in fuel performance analysis code FRAPCON and FRAPTRAN. Finally, the performances of Th0.923U0.077O2 fuel, Th0.923Pu0.077O2 fuel and UO2 fuel under both normal operating conditions and transient conditions (RIA and LOCA) are analyzed and compared. The Th0.923U0.077O2 fuel is found to have lower fuel center-line temperature and the thorium-based fuels are observed to have a delayed pellet-cladding mechanical interaction (PCMI) under steady state. Furthermore, the fission gas release, cladding strain and internal fuel energy under transient conditions are found to be lower too. Lastly, the cladding displacement and temperature under transient conditions are also compared. The thorium-based fuel was found to have a higher safety margin and accident resistance than conventional UO2 fuel under both normal operating conditions and accident conditions.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.