Multiobjective Optimization Strategy for Enhancing the Efficiency and Quality of Organic Thin-Film Manufacturing with Electrohydrodynamic Atomization Coating.

Abstract

Electrohydrodynamic atomization coating technology is well-suited for micro-/nanoscale thin-film additive manufacturing. However, there are still some challenges in quality control and parameter adjustment during the coating process. Especially when coating on nonconductive and nonhydrophilic substrates, film quality and thickness uniformity are difficult to control. This paper proposes an optimization strategy for enhancing the efficiency and quality of thin-film manufacturing on nonconductive, nonhydrophilic glass substrates. In this paper, a visual inspection system was developed for in situ inspection and identification of droplet deposition states in the substrate surface. Then, the statistical relationship between the operating parameters and the quality of the deposition state was analyzed by response surface methodology. On this basis, machine learning models and intelligent recommendation frameworks for small data sets were developed to rapidly optimize operating parameters and improve the quality of thin-film coating. Optimization strategy developed by applying the principles of statistical modeling, analysis of variance, and global optimization are more efficient and less costly than traditional parameter screening methods. The experimental results show that optimum deposition quality can be obtained with the recommended operating parameters. And, validation results show a 12.8% improvement in film thickness uniformity. At the same time, no mura defects appeared on the thin-film surface. The proposed optimization strategy can improve the efficiency and quality of additive manufacturing of micro and nano thin films and is beneficial for advancing industrial applications of the electrohydrodynamic atomization coating.