Abstract
Wind farm layout optimization (WFLO) can reduce the turbulence intensity on the wind turbines while maximizing power generation. To accurately compute turbulence intensity distribution in the wind farm, we utilize the innovative three-dimensional cosine-shaped turbulence intensity (3D-COTI) model. By integrating the three-dimensional cosine-shaped linear entrainment (3DCLE) wake model previously developed by the authors, we introduce a new multiple wind turbine wake model (3DCLE-M). This model considers the wake superposition effect, enabling precise calculation of power generation. Building upon the 3D-COTI and 3DCLE-M models, we propose a multi-objective WFLO approach to maximize power generation and minimize streamwise turbulence intensity in the wind-turbine-swept area. The results indicate that under maximized power generation, this approach significantly reduces turbulence intensity and its non-uniform distribution in the wind-turbine-swept area. In two ideal cases, the maximum turbulence intensity in all wind-turbine-swept areas of the optimized layout is 25 % and 3.8 % lower than that of the selected benchmark layout. By optimizing the layout of the Horns Rev offshore wind farm, a new layout can be obtained with increased total power output by 1.58 % and the reduced total duration of high-fatigue-load wind turbines under high turbulence intensity by 25 % compared to the benchmark.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.