Abstract
The utilization of 120° phase belt toroidal windings (120°-TWs) can bring power density improvement in a tubular permanent magnet linear generator (TPMLG). Unfortunately, the TPMLG with 120°-TWs (120°-TPMLG) usually involve multiple structural parameters, and the interaction or even conflict among those structural parameters would have strong impact on generator performances in the design optimization process. To alleviate this problem, a multi-objective design optimization method is proposed to conduct a multi-objectives optimization, which aims to obtain the high-power density and low-detent force. First, the comprehensive sensitivity analysis method, namely global sensitivity analysis, is adopted to evaluate the sensitivities of the structural parameters on the performances of the 120°-TPMLG. According to the evaluation results, the structural parameters are divided into three levels: non-sensitive level, mild-sensitive level, and strong-sensitive level. Then, to improve the whole design optimization efficiency, the direct-screening method, the surface method, and the genetic algorithm is implemented in the three levels, respectively. And the optimal structural parameters of the 120°-TPMLG are finally determined. To verify the feasibility of the 120°-TPMLG and the effectiveness of the proposed design optimization method, the performances of the optimal 120°-TPMLG are analyzed and compared with the initial one and the same dimensions TPMLG with traditional toroidal windings (T-TPMLG) in detail. It shows that the performances of the optimal 120°-TPMLG meet the design requirements. Moreover, the detent force is largely decreased and the power density is notably improved. The results prove that the proposed multi-objective design optimization method is available for the 120°-TPMLG.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Journal of Emerging and Selected Topics in Power Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
