Abstract
An aerodynamic/structural multidisciplinary design with multiple objectives was carried out for the supersonic fighter wing using response surface methodology. Through a series of static aeroelastic analyses of a variety of candidate wings, the aerodynamic performance and structural strength were calculated. Nine wing and airfoil parameters were chosen for the aerodynamic design variables, and four structural variables were added to determine the wing skin thickness. To consider various flight conditions, multipoint design optimization was performed on the three representative design points. As expected, the single-point design shows the most improved performance on its own design point, but it produces inferior results by not satisfying some constraints on other design points. To improve the performances evenly and moderately at all design points, a multipoint optimal design was conducted. A genetic algorithm was also introduced to control the weight of the multiple objectives. The multipoint designed wing features improved performance and satisfies whole constraints at all design points. It is similar to the real supersonic fighter wing that was developed through numerous wind-tunnel tests and tradeoff studies. The proposed multidisciplinary design optimization framework could be adopted as an efficient practical design tool for the supersonic fighter wing to fix the basic geometry at a conceptual design stage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.