Multilayers oil and oil-impregnated pressboard electric field simulation based on space charge

Abstract

Space charge build-up has been considered as the major issue in the development of HVDC apparatus such as the converter transformer. The existence of space charge can distort the local electric field, which could lead to the degradation and even breakdown of insulation materials. Therefore, it is vital to investigate factors that can affect space charge formation and dissipation characteristics such as the temperature, moisture, ageing, thickness, multi-layered structure and electric fields. This paper mainly focuses on the effect of multilayers and thickness on space charge behaviour of oil and pressboard insulation system. Space charge was measured using the pulsed electroacoustic technique (PEA) method. The space charge results are quantitatively analysed to establish the relationship between interfacial charge density and different pressboard and oil thickness ratios. A new space charge interpolation methodology is utilized to input space charge into the multilayers oil and pressboard model using COMSOL software. The local electric field of multilayers oil-impregnated pressboard and oil could be simulated, with the emphasis on the electric field after the polarity reversal operation. From space charge results, they indicate that the increased thickness of pressboard could prohibit the interfacial charge increase while the increased oil thickness could facilitate interfacial charge increase. Moreover, from the electric field simulation results, they indicate that there is the electric field gradient caused by the space charge for multilayers oil and oil-impregnated pressboard structure. After the polarity reversal, the maximum electric field of the oil caused by the space charge is higher than electric field calculated based on the Maxwell-Wagner theory.