Abstract
Highly reduced graphene oxide (rGO) films are fabricated by combining reduction with smeared hydrazine at low temperature (e.g., 100 degrees C) and the multilayer stacking technique. The prepared rGO film, which has a lower sheet resistance ( approximately 160-500 Omega sq(-1)) and higher conductivity (26 S cm(-1)) as compared to other rGO films obtained by commonly used chemical reduction methods, is fully characterized. The effective reduction can be attributed to the large "effective reduction depth" in the GO films (1.46 microm) and the high C1s/O1s ratio (8.04). By using the above approach, rGO films with a tunable thickness and sheet resistance are achieved. The obtained rGO films are used as electrodes in polymer memory devices, in a configuration of rGO/poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM)/Al, which exhibit an excellent write-once-read-many-times effect and a high ON/OFF current ratio of 10(6).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
