Abstract

The results of the optimization of the ammonia MBE technology of AlN/AlGaN/GaN/AlGaN heterostructures for high-power microwave field-effect transistors (FETs) are presented. The creation of technological systems of the EPN type for the deposition of group III nitrides by ammonia MBE, in combination with the development of optimum growth and postgrowth processes, make it possible to obtain AlN/AlGaN/GaN/AlGaN based heterostructures for high-power microwave FETs with the output static characteristics on the world best level. One of the main fields of application of the semiconductor heterostructures based on group III nitrides is the technology of high electron mobility transistors (HEMTs). Most investigations in this field have been devoted to the classical GaN/AlGaN structures with a single heterojunction. An alternative approach based on the use of double heterostructures with improved two-dimensional electron gas (2DEG) confinement offers a number of advantages, but such structures are usually characterized by a lower carrier mobility as compared to that in the single-junction structures. We succeeded in optimizing the double heterostructure parameters and growth conditions so as to obtain conducting channels with a 2DEG carrier mobility of 1450, 1350, and 1000 cm2/(V s) and a sheet electron density of 1.3 × 1013, 1.6 × 1013, and 2.0 × 1013 cm−2, respectively. Experimental HEMTs with 1-μm-long gates based on the obtained multilayer heterostructure with a doped upper barrier layer exhibit stable current-voltage characteristics with maximum saturation current densities of about 1 A/mm and a transconductance of up to 180 mS/mm.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call