Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to Microslip

Abstract

Vibration reduction of turbine blades by means of friction damping in shroud joints is a well-established technology in the field of turbomachinery dynamics. Three-dimensional contact constraints in the shroud coupling can induce highly nonlinear dynamics in the bladed disk assembly. Moreover, large normal contact stresses, which are typical for this application, necessitate the consideration of microslip effects. This study focuses on the accurate prediction of the forced response of tuned bladed disks subject to friction joints. In order to account for extended friction interfaces, the contact area is discretized into several contact points. Microslip behavior is explicitly enforced by a non-uniform normal pressure distribution. Local elastic properties of the contact area are accurately captured in the reduced order model of the structure by employing a component mode synthesis method. The steady-state forced response is efficiently computed using a Multi-Harmonic Balance ansatz. Thus, it is possible to study and explain the occurrence of internal resonances. Planar Coulomb friction and unilateral normal contact conditions are considered in terms of the Dynamic Lagrangian formulation. The normal preload of the shroud interface is varied in order to study the effect on vibration amplitude and resonance frequency.