Multifunctional Ion‐Lock Interface Layer Achieved by Solid–Solid Contact Approach for Stabilizing Perovskite Solar Cells

Abstract

AbstractIt has been a hindering issue in perovskite solar cells that the interfaces between the perovskite and charge transport layers show significantly high concentrations of defects with an amount about 100 times more than inside the bulk perovskite layer. The issue causes substantial reduction in both the efficiency and stability of the devices. Herein, a solid–solid contact approach is demonstrated to realize a multifunctional ion‐lock layer with strong chemical interaction to the perovskite layer. The multifunctional ion‐lock layer remarkably suppresses the interface defects and tunes the work function, contributing to promoting the carrier extraction, increasing the open‐circuit voltage, and enlarging the photocurrent. In addition, the multifunctional ion‐lock layer successfully locks ions from movement and thus improves the stability of the devices. Finally, with a multifunctional ion‐lock layer, the perovskite solar cells deliver an efficiency of up to 23.13% along with desirable long‐term operational, storage, and humidity stability. Consequently, the work offers guidelines for establishing defect‐suppressed interfaces between perovskites and hole transport layers.