Abstract
To achieve and maintain good operability of medical devices while reducing putative side effects for the patient, a promising strategy is to tailor the surface properties of such devices as they critically dictate the tissue compatibility and the biofouling behavior. Indeed, those properties can be strongly improved by generating mucin coatings on such medical devices. However, using coatings on optical systems, e.g., contact lenses, comes with various challenges: here, the geometrical and optical characteristics of the lens may not be compromised by either the coating process or the coating itself. In this study, we show how mucin macromolecules can be attached onto the surfaces of rigid, gas permeable contact lenses while maintaining all critical lens parameters. We demonstrate that the generated coatings improve the surface wettability (contact angles are reduced from 105° to 40° and liquid film break-up times are increased from <1 s to 31 s) and prevent tribological damage to corneal tissue. Additionally, such coatings are highly transparent (transmission values above 98 % compared to an uncoated sample are reached) and efficiently reduce lipid deposition to the lens surface by 90 % but fully maintain the geometrical and mechanical properties of the lenses. Thus, such mucin coatings could also be highly beneficial for other optical systems that are used in direct contact with tissues or body fluids.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.