Multifunctional Actuator Based on Graphene/PDMS Composite Materials with Shape Programmable Configuration and High Photothermal Conversion Capability.

Abstract

Photoresponsive smart actuators based on carbon materials are attracting increasing attention. However, the low content of carbon materials currently limits the development of carbon material actuators. In this work, we designed and prepared a multifunctional bilayer composite actuator with controllable structures and high photothermal conversion efficiency. The actuator consists of a graphene/polydimethylsiloxane (PDMS) composite layer and a PDMS layer. With an ultrahigh graphene mass fraction (30%), the actuator exhibits a good hydrophobicity, unexpectedly high photothermal conversion performance (from room temperature to 120 °C within 1 s), and rapid photo-response capability. By thermal regulation, ultraviolet laser cutting, and assembly, the actuator can achieve shape programmable configuration in three-dimensional directions. Bionic crawling robots achieve a crawling speed of 0.065 mm/s, and liquid tracking robots achieve a rotational motion of 106°/s, a linear motion of 8.42 mm/s, and a complex "W"-shaped trajectory motion. This work provides a simple and effective method for the preparation and realization of multifunctional actuators based on graphene composite materials.