Abstract

Low-fidelity analytic and computational wave drag prediction methods assume linear aerodynamics and small perturbations to the flow. Hence, these methods are typically accurate for only very slender geometries. The present work assesses the accuracy of these methods relative to high-fidelity Euler, compressible computational-fluid-dynamics solutions for a set of axisymmetric geometries with varying radius-to-length ratios (R/L). Grid-resolution studies are included for all computational results to ensure grid-resolved results. Results show that the low-fidelity analytic and computational methods match the Euler CFD predictions to around a single drag count ( ∼1.0×10−4) for geometries with R/L≤0.05 and Mach numbers from 1.1 to 2.0. The difference in predicted wave drag rapidly increases, to over 30 drag counts in some cases, for geometries approaching R/L≈0.1, indicating that the slender-body assumption of linear supersonic theory is violated for larger radius-to-length ratios. All three methods considered predict that the wave drag coefficient is nearly independent of Mach number for the geometries included in this study. Results of the study can be used to validate other numerical models and estimate the error in low-fidelity analytic and computational methods for predicting wave drag of axisymmetric geometries, depending on radius-to-length ratios.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.