Multifactor analysis of the infiltration characteristics of film hole irrigation under muddy water conditions

Abstract

Film hole irrigation under muddy water conditions is a new and effective water-saving irrigation technology. In order to determine the influence of multiple factors on the infiltration process of film hole irrigation under muddy water conditions, 12 sets of indoor infiltration tests were conducted to investigate the effects of four key influencing factors (muddy water sand content, hole diameter, soil bulk density, and infiltration time) on the infiltration characteristics of irrigation with film holes under muddy water conditions, in this study. Based on the experimental data, accurate and effective soil water infiltration and vertical and horizontal wetting front transport models were constructed. Based on the modeling results, the standard regression coefficients of each influencing factor against the fitted parameters were calculated and the effects of the factors on the fitted parameters were analyzed. Error analysis showed that both models could effectively simulate the soil water infiltration process under experimental conditions. Infiltration time was the dominant factor influencing the cumulative infiltration per unit of film hole area, followed by hole diameter, muddy water sand content and lastly, soil bulk density. Infiltration time was also the main influencing factor of the vertical wetting front transport distance, followed by soil bulk density, muddy water sand content, and lastly, hole diameter. Similarly, infiltration time exerted the greatest effect on the horizontal transport distance, followed by hole diameter, soil bulk density and muddy water sand content. The model validation revealed that both the calculated and measured values were distributed around the 1:1 line, reflecting the accuracy of the models. The results of this study can provide theoretical support for the design of film hole irrigation systems under muddy water conditions.