Multidisciplinary optimization methodology for truss-braced wing aircraft using high-fidelity structure sizing

Abstract

In this research, a method is developed to optimize the truss-braced wing aircraft configuration in a multidisciplinary design framework. Physics-based high-fidelity methods, that can capture the nature of the configuration changes, are employed for the disciplines where the existing classical methods are not reliable. High-fidelity geometry modeling, structure loading, structure optimization, and aeroelastic sizing methods are integrated into the aircraft multidisciplinary design and optimization. The developed algorithm is applied for the multi-objective optimization of a regional jet aircraft to minimize the cost and weight. The results demonstrate that the cost-optimum solution converges to a higher aspect ratio wing equipped with a higher bypass ratio engine, and a 7.94% reduction in the direct operating cost can be achieved. On the other hand, the weight-optimum wing planform tends to a slightly lower aspect ratio wing with a lower bypass ratio engine, while a 6.18% reduction in take-off weight is achieved. In addition to that, the findings of this study highlight the considerable effect that the engine technology has on the optimum layout, which suggests that the engine technology and its performance should also be a part of the design optimization process. The developed modular framework offers further optimization potential for the truss-braced wing aircraft, as more detailed models can be integrated.