Abstract
Liquid phase crystallized (LPC) silicon thin films on glass substrates are a feasible alternative to conventional crystalline silicon (c‐Si) wafers for solar cells. Due to substrate limitation, a low‐temperature technology is needed for solar cell fabrication. While silicon heterojunction is typically used, herein, the combination of vanadium oxide/c‐Si heterojunction as emitter and base contacts defined by IR laser processing of phosphorus‐doped amorphous silicon carbide stacks is explored. LPC solar cells are fabricated using such technologies to identify their issues and advantages with a promising performance of an active‐area efficiency of 5.6%. Apart from the absence of light‐trapping techniques, the relatively low efficiency obtained is attributed to a low lifetime in the LPC silicon bulk. These poor material properties imply a short diffusion length that makes it that only photogenerated carriers in the emitter regions can be collected. Consequently, future devices should show narrower base contact regions, suggesting a shorter‐wavelength laser, combined with longer LPC substrate lifetimes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.