Multicolor Inks of Black Phosphorus for Midwave-Infrared Optoelectronics.

Abstract

Black phosphorus (bP) based ink with a bulk bandgap of 0.33eV (λ = 3.7µm) has recently been shown to be promising for large-area, high performance mid-wave infrared (MWIR) optoelectronics. However, the development of multicolor bP inks expanding across the MWIR wavelength range has been challenging. Here a multicolor ink process based on bP with spectral emission tuned from 0.28eV (λ = 4.4µm) to 0.8eV (λ = 1.5µm) is demonstrated. Specifically, through the reduction of bP particle size distribution (i.e., lateral dimension and thickness), the optical bandgap systematically blueshifts, reaching up to 0.8eV. Conversely, alloying bP with arsenic (bP1- xAsx) induces a redshift in the bandgap to 0.28eV. The ink processed films are passivated with an infrared-transparent epoxy for stable infrared emission in ambient air. Utilizing these multicolor bP-based inks as an infrared light source, a gas sensing system is demonstrated that selectively detects gases, such as CO2 and CH4 whose absorption band varies around 4.3 and 3.3µm, respectively. The presented ink formulation sets the stage for the advancement of multiplex MWIR optoelectronics, including spectrometers and spectral imaging using a low-cost material processing platform.