Abstract
ABSTRACTNowadays routine residue monitoring involves the analysis of many compounds from different classes, mainly in urine. In the past two decades, developments heavily focused on the use of mass spectrometers (MS) and faster and more sensitive MS detectors have reached the market. However, chromatographic separation (CS) was rather ignored and the cognate developments in CS were not in line. As a result, residue analysis did not improve to the extent anticipated. CS by LC x LC is a promising technique and will enable a further increase in the range of compounds and compound classes that can be detected in a single run. In the present study, a self-built LC x LC system, using a 10 port valve, was connected to a single quadrupole MS with electrospray interface. Standards containing a mixture of sulphonamides, β-agonists and (steroid) hormones, 53 compounds, in total, were analysed. Results demonstrated that these compounds were well separated and could be detected at low levels in urine, i.e. limit of detection (LOD) from 1 µg L−1 for most β-agonists to 10 µg L−1 for some sulphonamides and most hormones. To enhance the sensitivity, optimisation was performed on an advanced commercial LC x LC system connected to a full scan accurate MS. This ultimately resulted in a fast high throughput untargeted method, including a simple sample clean-up in a 96-well format, for the analysis of urine samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.