Abstract
In this paper, a new antenna system for rapidly emerging multifunction devices is presented. The proposed antenna system consists of four antenna components each one operating at different frequency bands separately. The designed antennas are isolated and integrated on a single substrate. The first antenna is designed to operate at 1920–2170 MHz covering the UMTS band, whereas the second antenna is proposed for the lower band 5G systems and WiMAX operating within the frequency range of 3.4–4.2 GHz. Furthermore, another antenna is designed to cover the higher band 5G system and the IEEE 820.11a WLAN within the frequency range of 5.1–5.85 GHz. Finally, a 28 GHz bowtie-based MIMO antenna array is designed and simulated for the mmWave future 5G mobile networks. The proposed antennas were designed and simulated by using CST microwave studio. The results showed that all of the proposed antennas exhibited excellent reflection characteristics below −20 dB at the resonant frequency and achieved high radiation efficiency reached 99% in some cases with a peak gain ranging between 4–6 dBi. The proposed antenna system helps smartphones to perform multitasks and achieve a better-quality operation especially with the enormous growth of IoT techniques.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Periodica Polytechnica Electrical Engineering and Computer Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
