Abstract
Prediction of fatigue crack orientation can be an essential step for estimating fatigue crack path. Critical plane concept is widely used due to its physical basis that fatigue failure is associated with certain plane(s). However, recent investigations suggest that critical plane concept might need revision. In this paper, fatigue experiments that involve careful measurement of fatigue crack were reviewed. Predictions of fatigue crack orientation using critical plane concept were examined. Projected length and angle were used to characterize fatigue crack. Considering the entire fatigue life, this average representation suggests that it is more reasonable to assume the plane of maximum normal strain as the critical plane even though fundamentally the plane of maximum shear strain is more likely to be the critical one at early initiation stage.
Highlights
T here is still no unified definition of fatigue crack initiation
Considering a maximum shear strain damage parameter, the first step is to search for critical plane by transforming hysteresis loops at different planes using plane stress-strain transformation relations
They showed that reversed analysis for predicting fatigue life by assuming the critical plane as the experimentally observed plane showed that the predictions of strain-based models were mostly non-conservative
Summary
T here is still no unified definition of fatigue crack initiation. Yet, there is an agreement that there are three classes of fatigue crack growth: microscopic, small and macroscopic [1]. The critical plane is the plane at which shear strain is maximum This plane may only correspond to the orientation of the inception or early initiation of crack, with length scale in the order of microns. Fatigue life is predicted by coupling the damage with a life equation This procedure implies that crack will initiate at the plane of maximum shear strain and it will grow, within early growth stage, in the same orientation. Albinmousa and Jahed [6] examined the predictions of fatigue crack orientation on smooth specimens subjected to multiaxial loading using critical plane concept They showed that reversed analysis for predicting fatigue life by assuming the critical plane as the experimentally observed plane showed that the predictions of strain-based models were mostly non-conservative
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.