Abstract
We have characterized 200-mm and 300-mm Si wafers with a single epitaxial layer and with a triple epitaxial layer stack atop using multi-wavelength, high-resolution Raman spectroscopy. 96-point wafer mapping measurements were performed on all wafers. Statistics of Raman signal intensity, shift and full-width-at-half-maximum (FWHM) values, under different excitation wavelengths, were extracted and compared with two types of reference Si wafers (prime Si wafers and reclaimed Si wafers). Significant variations in Raman signal intensity, shift and FWHM were measured between reference wafers and epitaxial wafers indicating potential Si lattice stress and crystallinity variations. Excitation wavelength dependence of Raman signal intensity, shift and FWHM also indicated variations in the Si lattice stress and the crystallinity of epitaxial layers in the depth direction. Non-contact multiwavelength Raman spectroscopy was found to be very sensitive to the quality of epitaxial Si layers which makes this technique very effective in complimentary in-line process characterization and monitoring.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.