Abstract
A multi-wavelength LED array was used as an excitation source for in-column fiber-optic LED-induced fluorescence for CE. The light source consisted of a multi-wavelength LED array consisting of three different LEDs (430, 450 and 480 nm), a focusing lens and a gradient index lens group. The LED beam was collimated and reshaped with the gradient index lens group for coupling the LED light source into a single-mode optical fiber. In addition, the luminance and stability of the LED light source was improved by powering the LED under constant current at enhanced voltages. The benefits of this system were demonstrated by the simultaneous determination of FITC-labeled L-asparagine (Ex/Em 488/520 nm), 4-fluoro-7-nitro-2,1,3-benzoxadiazole-labeled epinephrine (Ex/Em 468/530 nm) and 3-(4-carboxybenzoyl)-quinoline-2-carboxaldehyde-labeled L-leucine (Ex/Em 440/530 nm). Detection limits of L-asparagine, epinephrine and L-leucine were estimated to be 0.8 x 10(-9), 12.0 x 10(-8) and 4.0 x 10(-8) M (S/N=3), respectively. The RSDs (n=6) for migration time and peak area were better than 0.71 and 0.92%, respectively. The performance of the developed multi-wavelength LED excitation source was compared to the use of a single-wavelength LED and found to provide superior sensitivity for the three fluorophores used in this study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.