Abstract

Simultaneously planar laser-induced fluorescence (PLIF) measurements of OH, CH, CH2O and toluene are carried out to investigate the structures of turbulent premixed methane/air jet flames in the flamelet regime and the thin-reaction zones regime. A premixed flame jet burner of an inner diameter of 1.5mm is employed. Stoichiometric methane/air mixtures introduced as a jet are ignited and stabilized in a hot co-flow generated by a coaxial porous plug pilot flame surrounding the jet. The Reynolds number for the studied jet ranges from 960 to 11,500 with the characteristic Karlovitz number ranging from 1 to 60. The focus of this study is on the characterization of the structures and turbulent burning velocity of premixed flames in the flamelet and the thin-reaction zones regimes. The preheat zone is analyzed using the CH2O and toluene PLIF fields, whereas the reaction zone is analyzed using the CH and OH PLIF fields. Laser Doppler Anemometer (LDA) measurements are performed to characterize the turbulence field and it is noted that when the Reynolds/Karlovitz number increases a successive thickening of the preheat zone is observed, whereas the reaction zone, characterized by the CH layer maintains nearly the same thickness. The heat release zone, characterized by the combination of the OH and CH2O PLIF fields, is shown to nearly maintain the same thickness under the present experimental conditions. The flame surface wrinkle ratio is shown to be Reynolds number and Karlovitz number independent when the Reynolds number is high enough such that the smallest wrinkle scales reach to the length scales of the thin reaction layers. The global fuel consumption speed of the jet flame is analyzed using the toluene PLIF field and the OH PLIF field. A discrepancy in the two consumption velocities is found as the Karlovitz number increases. This is found to be a result of the broadening of the oxidation zone. These findings provide experimental support to the flamelet and thin-reaction zone regime hypotheses of turbulent premixed combustion.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call