Abstract
Palmetto wood is garnering growing interest as a template for creating biologically-inspired polymer composites due to its historical use as an energy absorbing material in protective structures. In this study, quasi-static three-point bend tests have been performed to characterize the mechanical behavior of Palmetto wood. Full-field deformation measurements are obtained using Digital Image Correlation (DIC) to elucidate on the strain fields associated with the mechanical response. By analyzing strain fields at multiple length scales, it is possible to study the more homogeneous mechanical behavior at the macro-scale associated with the global load-deformation response; while at the microscale the mechanical behavior is more inhomogeneous due to microstructural failure mechanisms. Thus, it was possible to determine that, despite the presence of discontinuous macro-fiber reinforcement, at the macro-scale the response is associated with classical bending and progressive failure processes that are adequately described by Weibull statistics proceeding from the tensile side of the specimen. At the microscale, however, the failure mechanisms giving rise to the macroscopic response consist of both shear-dominated debonding between the fiber and matrix, and inter-fiber matrix failure due to pore collapse. These microscale mechanisms are present in both the compressive and tensile regions of the specimen, most likely due to local macro-fiber bending, which is independent of the global bending state. The pore collapse mechanism observed during mechanical loading appears to improve the energy absorption of the matrix material, thereby, transferring less energy and shear strain to the macro-fiber-matrix interface for initiation of debonding. However, the pore collapse mechanism can also accumulate substantial shear strain, which results in matrix shear cracking. Through these complex failure mechanisms, Palmetto wood exhibits a high resistance to catastrophic failure after damage initiation, an observation that can be used as inspiration for creating new polymer composite materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.