Multi-response optimization of M2 steel coatings deposited by co-axial laser cladding on A2 steel tool surfaces

Abstract

Laser cladding is a highly effective technique used in additive manufacturing to enhance the surface properties of workpieces. It is employed to improve wear resistance, corrosion resistance, and high-temperature resilience of materials. This study explores the utilization of laser cladding technology to repair the surface of AISI A2 tool steel by applying a coating of M2 steel. Sixteen experiments were designed using an orthogonal methodology to investigate the intricate relationship between various processing parameters, including laser power, scan speed, powder feed rate, and overlapping ratio. These parameters were examined in conjunction with key mechanical properties of the coating, such as micro-hardness, friction-wear characteristics, and shear bond strength.Additionally, analytical techniques such as Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and X-ray Diffraction (XRD) were employed to gain insights into the microstructure of the coatings and elucidate the underlying failure modes. Shear testing of the coatings indicated a tendency towards a brittle fracture mode within the coating, with the dominant wear mechanism involving a combination of abrasive and oxidative wear.Finally, a TOPSIS-Grey Relational Analysis (GRA) method was utilized to identify the optimal process parameters. These optimal parameters were determined to be a laser power of 1200 W, a scan speed of 5 mm/s, a powder feed rate of 14 g/min, and an overlapping ratio of 30 %. Subsequent validation experiments carried out with these parameters demonstrated superior performance compared to the optimal group identified in the orthogonal experiment.