Multi-objective Topology Optimization Design for a Certain Launcher Bracket

Abstract

To achieve weight reduction and enhance the firing accuracy of a specific type of launch device, the bracket was selected as the optimization subject for multi-objective topology optimization. Single-objective optimization often overlooks other influencing factors. To address the limitations of single-objective optimization, this study adopts the variable density method from the SIMP approach and proposes a multi-objective topology optimization based on compromise programming. This study, through multi-objective topology optimization of the bracket, obtained an optimized topology structure that maximizes static stiffness and the dynamic low-order natural frequencies of the launch device bracket at launch angles of 0°, 53°, and 85°, with an azimuth angle of 0°. Finally, the obtained topology structure was validated using finite element software. The design method presented in this paper not only enhanced the stiffness of the bracket structure for such launch devices and increased the first two natural frequencies of the bracket but also achieved weight reduction. The optimization design process also provides a reference for other mechanical structures.