Abstract
Abstract This study aims to optimize the input parameters such as mass fraction and particle size of SiC along with depth of cut, feed and cutting speed in the milling of Al5059/SiC/MoS 2 . The hybrid metal matrix composites are generally fabricated by reinforcing of different sizes (10, 20, 40 microns) of SiC with aluminium at a different levels (5%,10% &15%) whereas the MoS 2 addition is fixed as 2%. The effect of each control factor on response variables are analyzed through Taguchi S/N ratio method. Also, the most significant method for prediction of response parameters is satisfied by ANN model than the regression model. Analysis of variance (ANOVA) results envisage that mass fraction of SiC, feed rate is the most domineering factor on response variable.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
