Multi-Objective Optimization Design and Performance Comparison of Magnetorheological Torsional Vibration Absorbers of Different Configurations.

Abstract

The purpose of this study is to provide a convenient optimization design method for magnetorheological torsional vibration absorbers (MR-TVA) suitable for automotive engines, which is a damper matching design method that takes into account the needs of the engine operating conditions. In this study, three kinds of MR-TVA with certain characteristics and applicability are proposed: axial single-coil configuration, axial multi-coil configuration and circumferential configuration. The magnetic circuit model, damping torque model and response time model of MR-TVA are established. Then, under the constraints of weight, size and inertia ratio, according to different torsional vibration conditions, the MR-TVA mass, damping torque and response time are multi-objective optimized in two directions. The optimal configurations of the three configurations are obtained from the intersection of the two optimal solutions, and the performance of the optimized MR-TVA is compared and analyzed. The results show that the axial multi-coil structure has large damping torque and the shortest response time (140 ms), which is suitable for complex working conditions. The damping torque of the axial single coil structure is generally large (207.05 N.m), which is suitable for heavy load conditions. The circumferential structure has a minimum mass (11.03 kg) and is suitable for light load conditions.