Multi-objective NSGA-II based shape optimisation of the cross-sectional shape of passively cooled heat sinks

Abstract

PurposeThe purpose of the study is to optimise the cross-sectional shape of passively cooled horizontally mounted pin-fin heat sink for higher cooling performance and lower material usage.Design/methodology/approachMulti-objective shape optimisation technique is used to design the heat sink fins. Non-dominated sorting genetic algorithm (NSGA-II) is combined with a geometric module to develop the shape optimiser. High-fidelity computational fluid dynamics (CFD) is used to evaluate the design objectives. Separate optimisations are carried out to design the shape of bottom row fins and middle row fins of a pin-fin heat sink. Finally, a computational validation was conducted by generating a three-dimensional pin-fin heat sink using optimised fin cross sections and comparing its performance against the circular pin-fin heat sink with the same inter-fin spacing value.FindingsHeat sink with optimised fin cross sections has 1.6% higher cooling effectiveness than circular pin-fin heat sink of same material volume, and has 10.3% higher cooling effectiveness than the pin-fin heat sink of same characteristics fin dimension. The special geometric features of optimised fins that resulted in superior performance are highlighted. Further, Pareto-optimal fronts for this multi-objective optimisation problem are obtained for different fin design scenarios.Originality/valueFor the first time, passively cooled heat sink’s cross-sectional shapes are optimised for different spatial arrangements, using NSGA-II-based shape optimiser, which makes use of CFD solver to evaluate the design objectives. The optimised, high-performance shapes will find direct application to cool power electronic equipment.