Abstract
The favourable mechanical properties of Glass-fiber Reinforced Polymer Composite (GFRPC) enable their use in advanced aerospace structures. Research outcomes suggest that high-speed drilling is as an exceptional method for reducing delamination and improving the productivity. The objective of this paper is to optimise the drilling conditions with multi-performance characteristics with hybrid Taguchi desirability approach. The experiments carried out using Taguchi’s L9 3 level orthogonal array. Input machining conditions are feed rate, and spindle speed, and the responses are thrust force, torque, delamination at both the entry and the exit of the hole, and hole diameter. Results revealed that high spindle speeds and low feed rated increase the delamination and hole diameter. But high spindle speeds with low feed rates reduced the thrust force and torque. The optimization results revealed that optimal machining conditions are the speed at 12,000 rpm and feed at 3 mm/min for achieving minimum torque, thrust force, delamination and hole diameter values simultaneously. The spindle speed has greater influence than feed rate on drilling performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.