Abstract
AbstractThe upscaling of perovskite solar cells to achieve high‐throughput and highly efficient photovoltaic devices is still challenging. In this work, spray deposition of MAPbI3‐xBrx mixed halide perovskite is achieved using a ternary channel pumping system to deposit methylammonium iodide, PbI2, and PbBr2 precursor solutions. The compositions of six kinds of perovskite films (x = 0–0.5) are manipulated by adjusting the flow rate of the syringe pump rather than through traditional methods of preparing and changing the chemical management of the halogen precursors. Large clusters in highly oriented crystalline perovskite films are fabricated as MAPbI2.91Br0.09 film (x = 0.09) with a champion power conversion efficiency (PCE) of 15.60%. When vacuum‐assisted thermal annealing is used, the optimized PCE increased further up to 17.07%. To confirm the homogeneity of the perovskite film over the large area (7 × 10 cm2), eight divided subcells with dimensions of 2.5 × 2.5 cm2 showed the highest and average PCE of 17.11% and 16.25 ± 0.77%, respectively. These findings highlight the relevance of high‐throughput screening of perovskite compositions and the versatility of scalable solution process, in which active layers are deposited by spray‐coating.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
