MSW devices for EW receiver applications

Abstract

Significant improvements are required in the performance of MSW dispersive delay lines and filter banks before they are ready for systems application. Typically delay lines with bandwidths of 1 GHz or greater, differential delays in the range 200 ns to 1μs, and minimum phase errors (<±1 °) are required for large (∿40 dB) dynamic range compressive receivers. However, techniques are evolving (see rest of this issue) in this relatively new area of technology which will allow systems performance requirements on phase errors to be met. Possible approaches to low phase error dispersive delay lines include reflective arrays, stepped ground planes, and multiple YIG films. The stepped ground plane technique is the most advanced and uses an optimization approach to the delay-line design, which results in a minimum phase error [20]. Ultimately the minimum achievable phase error will be limited by reflections from transducers and multiple mode effects in the delay lines. The MSW compressive receiver requires parallel advances in high-speed digital processing techniques to achieve its full potential.