Abstract

You have accessJournal of UrologyCME1 May 2022MP32-05 BENCHTOP EVALUATION OF MINIATURE PERCUTANEOUS NEPHROLITHITOMY LITHOTRITES Patrick Whelan, Christopher Kim, Christian Tabib, Russell Terry, Glenn Preminger, and Michael Lipkin Patrick WhelanPatrick Whelan More articles by this author , Christopher KimChristopher Kim More articles by this author , Christian TabibChristian Tabib More articles by this author , Russell TerryRussell Terry More articles by this author , Glenn PremingerGlenn Preminger More articles by this author , and Michael LipkinMichael Lipkin More articles by this author View All Author Informationhttps://doi.org/10.1097/JU.0000000000002581.05AboutPDF ToolsAdd to favoritesDownload CitationsTrack CitationsPermissionsReprints ShareFacebookLinked InTwitterEmail Abstract INTRODUCTION AND OBJECTIVE: Percutaneous nephrolithotomy (PCNL) is the preferred surgical treatment for kidney stones >2cm. While PCNL has traditionally been performed using access sheaths from 24-30Fr in size, there is presently a trend toward using increasingly smaller sheaths (<20Fr) and scopes to perform what has been termed “mini-PCNL.” Smaller mechanical lithotripsy instruments have therefore been developed for this purpose, but are limited in comparative effectiveness. We performed benchtop assessment of multiple mini-PCNL lithotrites. METHODS: One 1cm3, hard Begostone phantom, mimicking a calcium oxalate monohydrate stone, was placed in a cylinder with four 5.5mm cylindrical openings to simulate size of a 16.5Fr mini-PCNL sheath to drain via Venturi effect. Lithotripsy was then performed with either the 1.9mm Trilogy (EMS), 1.83mm ShockPulse (SP, Olympus) and 200mm Holmium:YAG laser. Suction was used for the mechanical lithotrites. The Trilogy probes were used at 50% impact, 6Hz, 80% ultrasound and 10% suction. The ShockPulse was used at high-power setting. The 1.9mm probe was used with a 15Fr mini nephroscope (Olympus). The ShockPulse, 1.5mm Trilogy and laser fiber were used with a 12Fr mini nephroscope (Karl-Storz). The laser was set at 0.5J/70Hz Moses-Distance (MD) (Lumenis). 10 independent runs were performed with each probe. Time to complete stone clearance was recorded and mass stone clearance rates were calculated. RESULTS: The Trilogy 1.9mm probe showed superior stone clearance rate (11.69±3.68 mg/s) vs the SP 1.83mm probe (6.29±1.37 mg/s, p=0.003) and the laser fiber (4.73 ± 0.61 mg/s, p <0.0005), respectively (Figure 1). The SP was also superior to the laser (p=0.016). This translates to 4.6 and 7.9 minutes less treatment time vs the SP and laser, respectively, for a spherical 1.5cm diameter calcium oxalate monohydrate stone. CONCLUSIONS: Among these three commonly used mini-PCNL probes, the Trilogy 1.9 demonstrated clearly superior stone clearance rates in this benchtop model. This could be due to improved lithotrite properties and use of suction evacuation, especially compared to the laser. Future clinical testing is warranted to evaluate optimal lithotrite for miniPCNL. Source of Funding: Boston Scientific provided funding for this study through an educational grant © 2022 by American Urological Association Education and Research, Inc.FiguresReferencesRelatedDetails Volume 207Issue Supplement 5May 2022Page: e533 Advertisement Copyright & Permissions© 2022 by American Urological Association Education and Research, Inc.MetricsAuthor Information Patrick Whelan More articles by this author Christopher Kim More articles by this author Christian Tabib More articles by this author Russell Terry More articles by this author Glenn Preminger More articles by this author Michael Lipkin More articles by this author Expand All Advertisement PDF DownloadLoading ...

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call