Abstract

ABSTRACTHigh-quality AlGaN/GaN and AlGaN/GalnN DHs were fabricated by MOVPE using low-temperature deposited AlN buffer layer. We applied the newly designed dual-flow-channel reactor, by which high-quality and well-controlled AlGaN and GalnN alloys and their heterostructures have been grown. AlGaN/GaN-DH shows low-threshold stimulated emission by optical pumping at room temperature for both edge and surface modes. The peak wavelength of stimulated emission for edge mode was 369.5nm. The peak wavelength of stimulated emission was affected by the strain due to heterostructure as well as the many body effect under high excitation. The wavelength for stimulated emission can be widely changed by using GalnN as the active layer. AlGaN/GalnN DH with InN molar fraction of the active layer of 0.09 shows room temperature low-threshold stimulated emission for edge mode by optical pumping with peak wavelength of 402.5nm. A few mW-class symmetrical AlGaN/GaN DH LED and anti symmetrical AlGaN/GalnN/GaN DH LED using low energy electron beam irradiation (LEEB1) treated Mg-doped P-AlGaN cladding layer were fabricated. These results show that column-Ill nitrides are promising for the realization of practical short wavelength LED and LD.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.