Moving shocks through metallic grids: their interaction and potential for blast wave mitigation

Abstract

Numerical simulations and laboratory measurements have been used to illuminate the interaction of a moving shock wave impacting on metallic grids at various shock strengths and grid solidities. The experimental work was carried out in a large scale shock tube facility while computational work simulated the flow field with a time-dependent inviscid and a time-dependent viscous model. The pressure drop measured across the grids is a result of two phenomena which are associated with the impact of the shock on the metallic grids. First are the reflection and refraction of the incoming shock on the grid itself. This appears to be the main inviscid mechanism associated with the reduction of the strength of the transmitted shock. Second, viscous phenomena are present during the reflection and refraction of the wave as well as during the passage of the induced flow of the air through the grid. The experimental data of pressure drop across the grid obtained in the present investigation are compared with those obtained from computations. The numerical results slightly overpredict the experimental data of relative pressure drop which increases substantially with grid solidity at fixed flow Mach numbers. The processes of shock reflection and refraction are continuous and they can be extended in duration by using thicker grids that will result in lower compression rates of the structural loading and increase the viscous losses associated with these phenomena which will further attenuate the impacting shock. Preliminary theoretical analysis suggests that the use of a graded porosity/solidity material will result in higher pressure drop than a constant porosity/solidity material and thus provide effective blast mitigation.