Motion control of the ankle joint with a multiple contact nerve cuff electrode: a simulation study.

Abstract

The flat interface nerve electrode (FINE) has demonstrated significant capability for fascicular and subfascicular stimulation selectivity. However, due to the inherent complexity of the neuromuscular skeletal systems and nerve-electrode interface, a trajectory tracking motion control algorithm of musculoskeletal systems for functional electrical stimulation using a multiple contact nerve cuff electrode such as FINE has not yet been developed. In our previous study, a control system was developed for multiple-input multiple-output (MIMO) musculoskeletal systems with little prior knowledge of the system. In this study, more realistic computational ankle/subtalar joint model including a finite element model of the sciatic nerve was developed. The control system was tested to control the motion of ankle/subtalar joint angles by modulating the pulse amplitude of each contact of a FINE placed on the sciatic nerve. The simulation results showed that the control strategy based on the separation of steady state and dynamic properties of the system resulted in small output tracking errors for different reference trajectories such as sinusoidal and filtered random signals. The proposed control method also demonstrated robustness against external disturbances and system parameter variations such as muscle fatigue. These simulation results under various circumstances indicate that it is possible to take advantage of multiple contact nerve electrodes with spatial selectivity for the control of limb motion by peripheral nerve stimulation even with limited individual muscle selectivity. This technology could be useful to restore neural function in patients with paralysis.