Abstract

PurposePrevious studies have demonstrated the benefits of 2- and 4-tine staple fixation in scapholunate interosseous ligament (SLIL) reconstruction, including improved rotational control and avoidance of the articular surface. This study compared scaphoid and lunate kinematics after SLIL fixation with traditional Kirschner wire (K-wire) fixation or 2-tine staple fixation.MethodsEight fresh frozen cadaver arms with normal scapholunate (SL) intervals were included. Infrared motion capture was used to assess kinematics between the scaphoid and lunate as the wrists were moved through a simulated dart-throw motion. Kinematic data were recorded for each wrist in 4 states: SLIL intact, SLIL sectioned, K-wire fixation across SL interval and scaphocapitate joint, and 2-tine Nitinol staple fixation across SL interval. Strength of the SL staple fixation was evaluated using an axial load machine to assess load to failure of the staple construct.ResultsRange of motion of the scaphoid and lunate with SLIL intact and SLIL sectioned were similar. K-wire fixation across the SL interval significantly decreased the overall wrist range of motion as well as scaphoid and lunate motion in all planes except for scaphoid flexion. Conversely, scaphoid and lunate motion after staple fixation was similar to that in normal wrists, except for a significant decrease in scaphoid extension. Under axial load simulating a ground-level fall, 3 of 8 arms demonstrated no failure, and none of the failures was due to direct failure of the 2-tine staple.ConclusionsThis study demonstrates 2-tine staple fixation across the SL interval is effective in providing initial stability and maintaining physiologic motion of the scaphoid and lunate compared with K-wire fixation after SLIL injury.Clinical relevanceThis study demonstrates an alternate technique for the stabilization of the SL interval in repair of acute SLIL injuries using 2-tine staple fixation, which maintains near physiologic motion of the scaphoid and lunate after SLIL injury.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call