Abstract
Molybdenum disulfide (MoS2) is a graphene-like two-dimensional inorganic material, which has been used for the first time as an inorganic nanofiller to prepare a composite mixed matrix membrane to separate CO2 and N2. Polysulfone (PSf) was used as a support substrate and poly(dimethylsiloxane) (PDMS) was used as the gutter layer. The selective layer was prepared by mixing a CO2-philic copolymer Pebax 1657 with MoS2 nanosheets to enhance CO2 permeance. In addition, a simple drop-coating and evaporation method was developed to prepare the selective layer. Both permeability and selectivity of the MoS2-Pebax membrane have exceeded the pristine Pebax membrane. The permeability and selectivity reached to the maximum values of 64 Barrer and 93, respectively, at 0.15 wt % MoS2 nanosheets loadings. This result has been on the Robeson's upper bound line. The membrane also showed higher stability. The separation mechanism of the membrane is based on the well-known solution-diffusion mechanism. In addition, the stronger adsorption energy of MoS2 nanosheets to CO2 than N2 also provides the enhancement of gas selectivity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.